Industrial Microwave Dryer for Meat / Fish, / Fruits and vegetables Microwave Dryer

Belt Type Dryer
 
Belt Type Dryer
 
 

Applications:-
 
Industrial Hot Air Dryer for :
Fruits, Banana, Yam, Cassava, Apple, Papaya, Dried Fruits and Vegetables,
Pharmaceutical Products, Chemical Industry, Food Industry, Aquatic Products,
Traditional Medicines etc.

In conventional or surface heating, the process time is limited by the rate of heat flow into the body of the material from the surface as determined by its specific heat, thermal conductivity, density and viscosity. Surface heating is not only slow, but also non-uniform with the surfaces, edges and corners being much hotter than the inside of the material. Consequently, the quality of conventionally heated materials is variable and frequently inferior to the desired result.

Imperfect heating causes product rejections, wasted energy and extended process times that require large production areas devoted to ovens. Large ovens are slow to respond to needed temperature changes, take a long time to warm up and have high heat capacities and radiant losses. Their sluggish performance makes them slow to respond to changes in production requirements making their control difficult, subjective and expensive.

Conversely, with microwaves, heating the volume of a material at substantially the same rate is possible. This is known as volumetric heating. Energy is transferred through the material electro-magnetically, not as a thermal heat flux. Therefore, the rate of heating is not limited and the uniformity of heat distribution is greatly improved. Heating times can be reduced to less than one percent of that required using conventional techniques.

 

Features :-

Microwave dryer is a dryer which uses microwave to reduce the moisture from raw material. Unlike other external heating drying, microwave dryer for spice can dry the raw material from internal and external at the same time. Using this method, microwave dryer for spice can save drying time and avoid the raw material becoming metamorphism or coking at the overheat environment. The drying effect is very good, especially for the heat sensitive food.

Conventional means of heating and drying do not compare to the efficiency of an industrial microwave dryer. Incorporating high capacity, state-of-the-art microwave drying and heating equipment ensures that your products maintain quality while you experience double to triple the throughput achieved with conventional heating equipment.

The Main components of Microwave Dryer for Spice:

  1. Microwave generator system
  2. Microwave box
  3. Temperature controlling system
  4. Humidity controlling system
  5. Transmission system
  6. PLC and touch screen control system
  7. Humidity discharging system
  8. Electrical cabinets
  9. Cooling system
  10. Hot air recycling and circulatory system
   
 

Production Samples

 

Air Flow Dryer / Powder Air Flow Dryer

Belt Type Dryer
 
Belt Type Dryer
 
Belt Type Dryer
 
 

Applications:-
 
1. First, wet materials are put into the hopper of Airflow Dryer, then the heating generator generates hot air which mixes with wet materials and then is sucked into the drying pipes by the induced draft fan quickly.

2. The hot air going though the drying pipes, high temperature air contact with wet material, the moisture on the surface immediately began gasification, the surface temperature will gradually rise. The wet material gets fully dried during the drying process.

3. After the wet materials get dried, the dried materials are usually separated from the drying hot air with a cyclone collector.

 

Features :-

– The selection of Airflow Dryer models depends on the original moisture content of materials

– Airflow Dryer heat transfer coefficient is higher compared with the ordinary dryer

– Usually contact time is very short, most of the material only between 0.5-5s, the longest 5 minutes, therefore is suitable for drying heat-sensitive materials of low melting point, Airflow Dryer Contact time can be controlled.

– Airflow Dryer is simple, occupy smaller area, so it’s very convenient for smaller working site;

– Wide applicability, Airflow Dryer can be used for various powder materials, mainly sawdust, crushed straw, rice husk and so on.

– This Airflow Dryer can reduce moisture 20%-40% of the materials at one time with the advantages of lower consumption and high efficiency.

   
 

Production Samples

 

Manual Flip Type Multi Layer Drying Machine / Manual Flip Type Hot Air Dryer for Fruits & Vegetables

Belt Type Dryer
 
Belt Type Dryer
 
 

Applications:-
 
Industrial Hot Air Dryer for :
Fruits, Banana, Yam, Cassava, Apple, Papaya, Dried Fruits and Vegetables,
Pharmaceutical Products, Chemical Industry, Food Industry, Aquatic Products,
Traditional Medicines etc.

 

Features :-

– Excellent drying effect with yield of 100%.

– Maintains the original color and nature of materials.

– Hot air temperature 35º C – 260º C can be achieved depending on the mterial requirement.

– Multi Layer Drying.

– Economical Method of Drying

   
 

Production Samples

 

Continuous Belt Type Dryer for Yam / Cassava / Continuous Belt Type Dryer for Fruits / Vegetables

Belt Type Dryer
 
Belt Type Dryer
 
Belt Type Dryer
 

Applications:-
 
Industrial Hot Air Dryer for : Fruits, Banana, Yam, Cassava, Apple, Papaya, Dried Fruits And Vegetables,
Pharmaceutical Products, Chemical Industry, Food Industry, Aquatic Products,
Traditional Medicines etc.

 

Working Principle :-
 
The raw materials are evenly distributed on the conveyer belt through suitable mechanisms such as star distributor, swing belt, crusher or granulator, then the conveyer passes through the channel including several heating units. Each heating unit is equipped with air heater and circulation system. Each channel has one or several damp discharge systems. When the conveyer passes through it making the hot air will pass through the raw material from down to bottom and vice versa. In this way materials are dried evenly.

 

Features :-

– Hot air go through material layer from bottom to top and vice versa, it increases the contact area of material and hot air making the drying intensity.

– We adopt unique internal air blowing device which not only increases the relative speed of material and hot air and drying intensity but also makes the uniform drying of materials.

– It is fully enclosed structure. There are no outer air pipes except the dehumidifying air pipe making the improved heating efficiency and working condition

– It is easy to reach at all parts inside the main machine, making it easy for cleaning.

– The conveyor belt speed can be controlled to ensure the final moisture of products

   
 

Production Samples

 

Yam / Cassava Hot Air Tray Dryer, Tray Dryer / Fruits and Vegetables Hot Air Dryer

pouch-packing
 
pouch-packing
 
pouch-packing
 

Applications:-
 
Industrial Hot Air Dryer for : Fruits, Banana, Yam, Cassava, Apple, Papaya, Dried Fruits And Vegetables,
Pharmaceutical Products, Chemical Industry, Food Industry, Aquatic Products,
Traditional Medicines etc.

 

Working Principle :-
 
Autopack’s hot air circulating drying oven is equipped with low-noise & high temperature-resistant axial flow fan and automatic temperature control system. The whole circulating system is completely closed, which can improve the thermal efficiency from traditional 3-7% to current 35-45%, and the maximum thermal efficiency could be up to 50%.
The drying process is that the raw material is heated in the trays with hot air circulation, the wet moisture is taken out from material and is exhausted outside the drying chamber at the same time.

 

Features :-

– Hot air is circulated inside the oven to ensure a high drying efficiency and save energy.

– It uses enhanced ventilation and equipped with adjustable air distribution for uniform drying.

– It’s batch operation so can adjust process condition anytime. Thus can change product from time to time.

– Suitable for drying high-value product or small-batch product.

– Feed and dry material in tray, easy to load and unload.

– Low noise and steady operation, the temperature is controlled automatically.

   
 

Production Samples


PET Blowing Machines

 

Description :-
5 Gallon blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is used to produce any shape of Jar from PET with neck finishes from 15mm-200mm.


 

 

Description :-
Automatically arrange the perform after put perform in the auto-loader, no need to put the perform by hand manually . Automatically bottle dropping ,no need taking bottle by hand Adopting high technology Micro PLC controller which ensures the machine working properly and stable Sole heating electricity saving design. 50% electricity saving comparing to the other machine Specially mould locking clamping system,1.5times efficiency.


 

 

Description :-

Fully Automatic Blow Molding Machine is especially used to produce 3 gallon and 5 gallon bottles and is used to produce any shape of Jar from PET with neck finishes from 15mm-200mm.


 

 

Description :-

Suitable for Yogurt, Butter, Pickles, Juices, etc.

 

This machine is used for automatic filling and sealing of PP / HIPS Cups. This machine is well accepted in market due to its easy operation, and smooth production & low failure rate.


 

 

Description :-

Our Company is professional plastic mould supplier, which specializes in developing, designing, and manufacturing kinds of plastic moulds for both international and national customers.

We supply every kind of blow moulds, the shape of the mould nearly including the whole mineral water packing market, juice packing market, foods and some nonfood packing market.


about-lftbg

Production Samples

about-bg
 
 

Pet Blowing Moulds / PET Bottle Moulds

Description:-

Our Company is professional plastic mould supplier, which specializes in developing, designing, and manufacturing kinds of plastic moulds for both international and national customers.

We supply every kind of blow moulds, the shape of the mould nearly including the whole mineral water packing market, juice packing market, foods and some nonfood packing market.

about-lftbg

Production Samples

about-bg

Fully Automatic Jar Pet Blowing Machine / Automatic Jar PET Bottle Blowing Machine 

Description:-

Fully Automatic Jar Pet Blowing Machine is especially used to produce 3 gallon and 5 gallon bottles and is used to produce any shape of Jar from PET with neck finishes from 15mm-200mm.

After sales service:

With good brand reputation and attitude of customer-centric, we invite special technologists responsible for after sales.

Specification : –

ITEM   HZ-3000A
2-Cavity 3-Cavity 4-Cavity 6-Cavity
       
Material / PET/PP PET/PP PET/PP PET/PP
Volume L 0.1-2(2-cav)/3-6(1-cav) 0.1-2(3-cav) 0.1-2(4-cav)/3-6(2-cav) 0.1-2(6-cav)/3-6(6-cav)
Theoritical output Pcs/h 2200-3000 3300-4500 4400-6000 6600-9000
Max.length mm 340 340 340 340
Max.diameter mm 120 120 120 120
Max.mould thickness mm 180-260 180-260 180-260 180-260
Clamping force KN 200 300 400 500
Power KW 15 20 45 55
Voltage/Frequency V/HZ 220-380/50-60 220-380/50-60 220-380/50-60 220-380/50-60
about-lftbg

Production Samples

about-bg

Fully Automatic Pet Blowing Machine / Automatic PET Bottle Blowing Machine 

Application :-

Mineral water, carbonated drink, juice, medicine, cosmetic, oil, pharmaceutical, pet can, jars bottles etc

Description:-

Fully Automatic Blow Molding Machine is especially used to produce 3 gallon and 5 gallon bottles and is used to produce any shape of Jar from PET with neck finishes from 15mm-200mm. 

After sales service :

With good brand reputation and attitude of customer-centric, we invite special technologists responsible for after sales

Specification : –

ITEM   HZ-3000A
2-Cavity 3-Cavity 4-Cavity 6-Cavity
       
Material / PET/PP PET/PP PET/PP PET/PP
Volume L 0.1-2(2-cav)/3-6(1-cav) 0.1-2(3-cav) 0.1-2(4-cav)/3-6(2-cav) 0.1-2(6-cav)/3-6(6-cav)
Theoritical output Pcs/h 2200-3000 3300-4500 4400-6000 6600-9000
Max.length mm 340 340 340 340
Max.diameter mm 120 120 120 120
Max.mould thickness mm 180-260 180-260 180-260 180-260
Clamping force KN 200 300 400 500
Power KW 15 20 45 55
Voltage/Frequency V/HZ 220-380/50-60 220-380/50-60 220-380/50-60 220-380/50-60
about-lftbg

Production Samples

about-bg
 

Automatic Pet Blowing Machine / Automatic Pet Bottle Blowing Machine

Applications : –

Mineral water, carbonated drink, juice, medicine, cosmetic, oil, pharmaceutical, pet can, jars bottles etc

Description :-

Automatically arrange the perform after put perform in the auto-loader, no need to put the perform by hand manually .
Automatically bottle dropping ,no need taking bottle by hand

Adopting high technology Micro PLC controller which ensures the machine working properly and stable Sole heating electricity saving design. 50% electricity saving comparing to the other machine Specially mould locking clamping system,1.5times efficiency.

 

Specification : –

TYPE ITEM MEASUREMENT  
  Material / PET/PP/PE/PC
  Volume L 0.3-1.5L(3-cavity)
END PRODUCT The oretical output Pcs / h 1500
  Max. Length mm 360
  Max. Diameter mm 180
  Max. mould plate dimension(L×H) mm 4200×500
MOULD PLATE Max .mould thickness mm 120-240
Clamping force KN 360
  Mould opening stroke(Adjustable) mm 150-350
MAIN MACHINE ELECTRICITY Power KW 16
Voltage/Frequency   220/380/50-60
about-lftbg

Production Samples

about-bg