Double Layer Plastic / Thermoforming Sheet Extruding Machine

Description :-

Double layers plastic sheet extruding machine is mainly used to produce various top grade sheet of PP, PE, HIPS, ABS and EVA.

Plastic sheet extruding machine is for making PP & PS sheet for thermoforming machine to make plastic containers, like disposable cups. It is applicable in producing various kinds of plastic sheets of PP which are used for making drinking cups, ice-cream cups, jelly cups, beverage mugs, stationary & office supplies and other packaging vessel as well.

This machine is characterized by following features :

This machine set is the combination of main parts as extruder, cylinder, winder, and electric control console. The screw and the cylinder are made of high quality alloy steel with optimum hardness, strong corrosion resistance and long service lifetime after nitrogen treatment hardness, channel in die head is of coat-hanger design and it ensures the even thickness and the effect. The temperature of the die head, mesh change and the cylinder are separately controlled.

Features :

1) Screw and cylinder:

a) Made of 38CrMoAlA

b) Nitrogen treatment

c) Corrosion resistant

2) Wearable

3) Good plastic performances of the sheet guaranteed by the ratio of the length and the diameter

4) New design of the filter improves the productivity and makes the operation convenient

5) Developed by taking the advanced technology from both home and abroad into consideration on the basis of the single layer plastic sheet extruder

6) Applicable in producing multilayer PP, PE and PS sheets, which are used to produce drinking cups, ice-cream cups, yogurt cups, packing boxes and other plastic vessels

Specification

Sheet Width(mm) 650 700 1000 1400
Sheet Thickness(mm) 0.3-2.0 0.3-2.0 0.3-2.0 0.3-2.0
Screw Diameter(mm) 90-50 100-65 105-70 120-80
L/D Ratio of Screw 1:30 1:30 1:30 1:30
Main Motor Power(kw) 37-11 45-18 55-22 75-30
Max Outpt(kg/h) 160 185 240 330
Assemblin100g Set Power(kw) 100 125 165 220

Cap Compression Moulding Machines

Description :-

Compression Molding is a well known Technology, worldwide. Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.


 

Description :-

Compression Molding is a well known Technology, worldwide. Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.
The cap production is much faster and of even quality and the power consumption is also much lesser than an injection molding machine.


 

Description :-

Compression Molding is a well known Technology, worldwide. Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.


 

Description :-

This machine can make extension part of anti-theft ring fold inward, together with the advanced control of the air system and the latest PLC system to realize the automatic spout feeding, sorting & allocation. greatly improves the productivity effect. This machine effectively solves the problem of anti-theft ring infolding.


 

Description :-

The machine is used to cut the ring on the bottle cap made with the molding machine. It is equipped with an automatic cap sorter and an automatic cutter temperature control device, so the bottle cap made with this machine has small and smooth knife slit, which makes the cap more beautiful.


 

Application :-

Lining machine is used to produce sealing liner for caps, thus the cap can seal well and prevent it from air leakage or liquid leakage, even for carbonated soft drink.


about-lftbg

Cap making Flowchart

about-bg
about-lftbg

Production Samples

about-bg

Cap Lining Machine

Applications :

Lining machine is used to produce sealing liner for caps, thus the cap can seal well and prevent it from air leakage or liquid leakage, even for carbonated soft drink.

 

Description :

This machine is mainly used to make pads for plastic bottle caps. It first fluidizes the dry domestic and imported EVA/TPE granular plastic with high temperature and then mold presses the fluid on the inner cap. It is compact, efficient and easy to operate. The pad produced with it is smooth and uniform. The bottle cap with it opens easily and seals tightly.

The liner produced by this machine is very smooth and uniform, and has better leak-proof performance and pressure resistance capability. 

Specification

Min Cap Diameter :

25mm

Max. Cap Diameter :

60mm

Min. Cap Height :

15mm

Max. Cap Height :

25mm

Production Capacity(28mm PCO Cap) :

10,000~12,000pcs/hour 

Installed Electrical Power :

15kw (50Hz) 

Consumed electrical power(approximat) :

8kw

Compressed air consumption(approxximate) :

600NL/min

about-lftbg

Production Samples

about-bg
 

Automatic Cap Slitting Machine

Description :-

The machine is used to cut the ring on the bottle cap made with the molding machine. It is equipped with an automatic cap sorter and an automatic cutter temperature control device, so the bottle cap made with this machine has small and smooth knife slit, which makes the cap more beautiful.

 

Specification

Minimum Cap Diameter :

15mm

MaximalCap Diameter :

60mm

MinimumCap Height :

15mm

MaximalCap Height :

30mm

Production Capacity(30mm Cap) :

upto 20,000~30,000caps/hour

Installed Electrical Power :

1kw (50Hz)

Installed Electrical Power :

0.5kw (50Hz)

about-lftbg

Production Samples

about-bg
 

Cap Folding Machine

Description :-

This machine can make extension part of anti-theft ring fold inward, together with the advanced control of the air system and the latest PLC system to realize the automatic spout feeding, sorting & allocation. greatly improves the productivity effect. This machine effectively solves the problem of anti-theft ring infolding.

 

Specification

Min. Cap Diameter: 26-30mm 
Max. Cap Diameter: 60mm
Min. Cap Height: 15mm 
Max. Cap Height: 25mm
Production Capacity(30mm Caps) : upto 20,000~30,000pcs/hour 
Installed Electrical Power : 2kw (50Hz) 
Consumed electrical power(approximat) : 1.5kw 
Compressed air consumption(approxximate) : 100NL/min
about-lftbg

Production Samples

about-bg
 

32 cavity Compression Cap Moulding / Making Machine

Description :-

Compression Molding is a well known Technology, worldwide.  Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.

The cap production is much faster and of even quality and the power consumption is also much lesser than an injection molding machine.

 

Caps made by compression molding have better geometrical features and are more consistent compared to the injection process and allow the user to employ a wider range of raw materials.

The machine makes soda and mineral water bottle caps from plastic granular raw material which is fed via the hopper, fluidized with high temperature, and then forms die block that is extruded from the discharge outlet of the extruder, cut with the cutting tray, uniformly distributed into each die cavity and finally mould pressed.

Continuous compression moulding machine for plastic cap manufacturing via the extrusion of dry-blend granulated compounds (i.e. HDPE, PP), metering, pelletting and insertion in the cavities to mould it into the final, well defined shape. Machine capacity depends heavily on compound properties and the geometry of the manufactured caps.

 

Features :

- Fully automatic, runner less, reducing your costs of labor and power up to 30-60%. 

- 2-3 times faster than production than injection molding.

- Driven by pneumatic system, wearing of parts reduced to the minimum level.

- Key components easy to be assembled and disassembled.

- Stable grammage and wall thickness & consistent output of caps.

- Standard components resulting in flexible interchangeability.

- Optimized design, user-friendly control panel, speed of production adjustable.

- Low Rejection Rate.

- High Finish.

- Less scrap.

Specification

Max. Cap Diameter: 60mm
Min. Cap Height: 15mm 
Max. Cap Height: 25mm
Production by 24 Hours: 360, 000~430,000PCS for dia. 30mm cap 
Installation Power: 60 KW (50HZ) 
Working Power:  40 KW 
about-lftbg

Cap making Flowchart

about-bg

24 cavity Compression Cap Making / Moulding Machine

Description :-

Compression Molding is a well known Technology, worldwide.  Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.

The cap production is much faster and of even quality and the power consumption is also much lesser than an injection molding machine.

 

Caps made by compression molding have better geometrical features and are more consistent compared to the injection process and allow the user to employ a wider range of raw materials.

The machine makes soda and mineral water bottle caps from plastic granular raw material which is fed via the hopper, fluidized with high temperature, and then forms die block that is extruded from the discharge outlet of the extruder, cut with the cutting tray, uniformly distributed into each die cavity and finally mould pressed.

Continuous Compression moulding machine for plastic cap manufacturing via the extrusion of dry-blend granulated compounds (i.e. HDPE, PP), metering, pellet ting and insertion in the cavities to mould it into the final, well defined shape. Machine capacity depends heavily on compound properties and the geometry of the manufactured caps.

 

Features :

- Fully automatic, runner less, reducing your costs of labor and power up to 30-60% .

- 2-3 times faster than production than injection molding.

- Driven by pneumatic system, wearing of parts reduced to the minimum level.

- Key components easy to be assembled and disassembled. 

- Stable gram mage and wall thickness & consistent output of caps.

- Standard components resulting in flexible interchangeability.

- Optimized design, user-friendly control panel, speed of production adjustable.

- Low Rejection Rate.

- High Finish.

- Less scrap.

Specification
Number of Cavities 24cavities 
Min. Cap Diameter 15mm
Max. Cap Diameter 60mm
Min. Cap Height 15mm
Max. Cap Height 60mm
Production Capacity(30X20mm) 12000-13800caps/hour
Installation Power 35KW(50HZ)
Working Power 24KW
about-lftbg

Cap making Flowchart

about-bg
 

16 cavity Compression Cap Moulding / Making Machine

Description :-

Compression Molding is a well known Technology, worldwide.  Today, most of the caps for soft drinks and water, are produced on Compression Molding Machines, since this process uses air compressor to provide the pressure. The pressure is much higher, stable and provides even pressure to every mould. So the caps made by this process are smoother and with a tighter structure.

 

The cap production is much faster and of even quality and the power consumption is also much lesser than an injection molding machine.

Caps made by compression molding have better geometrical features and are more consistent compared to the injection process and allow the user to employ a wider range of raw materials.
The machine makes soda and mineral water bottle caps from plastic granular raw material which is fed via the hopper, fluidized with high temperature, and then forms die block that is extruded from the discharge outlet of the extruder, cut with the cutting tray, uniformly distributed into each die cavity and finally mould pressed.

 

Continuous Compression Moulding machine for plastic cap manufacturing via the extrusion of dry-blend granulated compounds (i.e. HDPE, PP), metering, pelletting and insertion in the cavities to mould it into the final, well defined shape. Machine capacity depends heavily on compound properties and the geometry of the manufactured caps.

 

 

Features :

- Fully automatic, runner less, reducing your costs of labor and power up to 30-60%. 

- 2-3 times faster than production than injection molding.

- Driven by pneumatic system, wearing of parts reduced to the minimum level.

- Key components easy to be assembled and disassembled.

- Stable gram mage and wall thickness & consistent output of caps.

- Standard components resulting in flexible interchangeability.

- Optimized design, user-friendly control panel, speed of production adjustable.

- Available in 16 – 48 cavities.

- Low Rejection Rate.

- High Finish.

- Less scrap.

Specification

Number of Cavities: 24 cavities

Min. Cap Diameter: 20mm

Max. Cap Diameter: 60mm

Min. Cap Height: 15mm

Max. Cap Height: 25mm

Production by 24 Hours: 240, 000~280,000PCS for dia. 30mm cap

Installation Power: 20 KW (50HZ)

Working Power: 15 KW

about-lftbg

Cap making Flowchart

about-bg
 

Plastic Thermoforming Machines

Description :-

Plastic sheet extruding machine is for making PP & PS sheet for thermoforming machine to make plastic containers, like disposable cups. It is applicable in producing various kinds of plastic sheets of PP which are used for making drinking cups, ice-cream cups, jelly cups, yogurt cups, packing boxes, beverage mugs, stationary & office supplies and other packaging vessel as well.

Read More…


Plastic Sheet Extruding Machine / Thermoforming Sheet Extruder

Description :-

Plastic sheet extruding machine is for making PP & PS sheet for thermoforming machine to make plastic containers, like disposable cups. It is applicable in producing various kinds of plastic sheets of PP which are used for making drinking cups, ice-cream cups, jelly cups, yogurt cups, packing boxes, beverage mugs, stationary & office supplies and other packaging vessel as well.

This machine is characterized by following features : This machine set is the combination of main parts as extruder, cylinder, winder, and electric control console. The screw and the cylinder are made of high quality alloy steel with optimum hardness, strong corrosion resistance and long service lifetime after nitrogen treatment hardness, channel in die head is of coat-hanger design and it ensures the even thickness and the effect. The temperature of the die head, mesh change and the cylinder are separately controlled.

 

Features :

1. The extruding machine adopts big length-diameter ratio of the detached screw. The plasticization effect is better and the pressure is stable.

2. The die head adopts high quality steel and the structure is reasonable.

3. Electric lift and down mode horizontal three-roller press polish is more suitable for the technological requirement of the production.

4. Cutting device, corona device, measure device, double-work position rewinder device that can ensure flattening rewind of the sheet. 

Specification

Sheet Width (mm) 650

1000

1

Sheet Thickness (mm) 0.12-2

0.12-2

0.12-2

Screw Diameter (mm) 90

105

120

L/D Ratio of Screw 1:33

1:33

1.33

Main Motor Power(kw) 45

55

75

Max Output(kg/h) 145

185

250

Assembling Set Power(kw) 90

120

160